A craftsman lawn mower is a machine that comes in handy when it comes to lawn maintenance. However, a drive belt failure reduces the mower’s performance by hindering effective energy transfer from the engine to the wheels. Although the replacement process seems challenging, the below guide provides you with detailed information on how to replace the drive belt on a Craftsman lawnmower.
The drive belt in a craftsman lawn mower is arguably its most vital part and needs to be in pristine working condition. However, it has a lifespan and needs periodic replacement. Before beginning the drive belt replacement process, you will need the following tools:
How to Replace a Drive Belt on a Craftsman Lawn Mower
Prepare the Lawn Mower
The first step is to put on your gloves and place your craftsman lawn mower on flat ground like a garden shed or garage, as a sloped surface will make it challenging to work on it. Before commencing, ensure you turn off the ignition and remove the key.
To avoid electrocution, remove the power cable and the spark plug. Tightly seal off the fuel tank to eliminate chances of fuel leaks. You can use a polythene bag to cover the fuel tank opening and then tighten the cap.
Drain The Fluids
You will need to drain the gas and oil to be able to replace the drive belt without issues. You’ll need to tip the mower on its side.
Clean the Deck and the Shaft
Using a brush, clean the dirt on the deck and the debris on the shaft. Cleaning not only makes your replacement task easy but also improves the overall lifespan of the mower.
Remove the Old Drive Belt
To be able to access the drive belt for removal, you need to loosen the crankshaft pulley. To do this, use a socket wrench to turn the flywheel bolt clockwise. Turn the crankshaft pulley counterclockwise until you bring it out. At this point, free up and remove the old and worn-out belt. Remember to pay attention as you remove the drive belt as it may be under tension.
Install the New Belt
First, at this stage, lower the front wheels back to their initial position by removing the wooden block. Insert the new belt via the deck’s front while ensuring there is contact with the transmission pulley. Settle the belt on the transmission pulley by pulling the hood upwards, and once done, lower back the front hood.
Then, lift the front wheels by pressing the rear handle and placing a block of wood under the deck. Using a socket wrench, tighten the belts by turning them in the counterclockwise direction. Reinstall the crankshaft pulley to its initial position by turning it in the clockwise direction. Then carefully attach the crankshaft pulley with the drive belt.
Reinstall the Blade
Using the screws, settle the crankshaft pulley with the blades. Using the socket wrench, tighten the attaching screws. Once the blade is in place, you can lower the front deck again by removing the block of wood.
Test the Mower
Now, it’s time to test whether the drive belt replacement is successful. Unseal the fuel tank by removing the polythene sheet under the fuel tank cap. Reconnect the spark plug and the power cable to the battery. Start the craftsman mower and try to mow while monitoring its precision, cutting speed, and movement.
Also, listen for any weird noises from the mower. If everything is working well, then you can go ahead to mow your lawn. However, if you hear squealing noises or notice something abnormal, you might need professional help.
Remove the Deck
Estimated Cost: 35 USD
- A pair of gloves
- A new drive belt
- Cleaning brush
- Socket wrench
Materials: A wooden block
Recommended Drive Belts For Craftsman Lawn Mowers
- NOTE: please check your OEM# and belt size before ordering. This belt...
- 1/2 x 95" OD(Outside dimension）. You can find the inside...
- Replacement part# 138255 / 160855 compatible with Craftsman 42"
- This belt is NOT OEM belt. The OEM number is just for your help in...
Although changing the drive belt of a craftsman lawn mower is not straightforward, you can do it yourself by following the above steps. Remember to follow the manufacturer’s instructional manual during the disassembly and assembly of the machine. Also, follow all the safety precautions to avoid injury.